Nine processes, one building, one datum chain. Pick a process below, or send the drawing and we will tell you which route is cheapest.
Capabilities
This is what lets us take a complete component rather than a single operation — and what keeps a part on one datum chain from raw material to final inspection.
Spur, helical and internal gears cut on hobbing and shaping machines.
Learn more →
External cylindrical grinding for roundness, straightness and surface finish.
Learn more →
Plastic injection moulds designed and built in-house, then maintained by the same team.
Learn more →At a glance
| Process | What it is for | Typical work |
|---|---|---|
| CNC Turning | Turning, mill-turn and small-to-medium batch production of round parts. | Shafts, pins and spindles, Sleeves, bushings and bearing seats … |
| CNC Milling | 3-, 4- and 5-axis milling of complex parts, pockets, contours and fixtures. | Housings and enclosures, Plates, brackets and mounts … |
| Gear Hobbing & Shaping | Spur, helical and internal gears cut on hobbing and shaping machines. | Spur and helical gears, Internal gears and ring gears … |
| OD Grinding | External cylindrical grinding for roundness, straightness and surface finish. | Shafts and stepped shafts, Bearing journals … |
| ID Grinding | Internal grinding of bores, sleeves and bearing seats. | Bearing seats and housings, Sleeves and bushings … |
| Wire EDM | Wire EDM for sharp internal corners, hardened material and thin walls. | Die inserts and punches, Sharp internal corners … |
| Sinker EDM | Die-sinking EDM for cavities, deep ribs and features cut into hardened steel. | Mould cavities and cores, Deep ribs and narrow slots … |
| Mold Making | Plastic injection moulds designed and built in-house, then maintained by the same team. | Multi-cavity production moulds, Prototype and bridge tooling … |
| Injection Molding | Plastic parts moulded on presses we feed from tooling we made. | Production plastic components, Prototype and bridge tooling runs … |
How to read this site
Most parts need more than one process. A shaft is turned, then ground. A mould is milled, then EDM’d. When those operations live in different companies, every handover re-establishes datums and adds a queue. When they live in one building, the datum chain stays intact and the lead time is one plan instead of three.
We will not quote a tolerance we cannot hold repeatably, and we will not take a process we are not equipped for. If your drawing is better served by a specialist we are not, we will say so rather than quote it anyway.
What that looks like
A shaft is not finished when it comes off the lathe. Below: the shop it comes off, a shaft whose last operation is grinding, and a worm wheel that was hobbed after its blank was turned here. Same building, same purchase order.
Tell us the part, the material and the quantity. An engineer reviews your drawing and replies within one working day — usually with a suggestion on how to make it cheaper.
